AGE APPROPRIATE WARNING

*ADULT SUPERVISION & PROPER SAFETY EQUIPMENT ARE REQUIRED WHEN UTILIZING THE TOOLS, PRODUCTS & TECHNIQUES DESCRIBED HERE ON OUR BLOG TO CREATE STAR WARS CUSTOMS.
Showing posts with label Jyn Erso. Show all posts
Showing posts with label Jyn Erso. Show all posts

Saturday, January 26, 2019

3.75" SUPER-ARTICULATED "JYN ERSO - EADU" by Customs for the Kid

This was an extremely easy custom action figure to produce. We got the idea from Star Wars customizer, wedgeswingman, in a post he did in the Rebelscum forums. Fabrication takes two action figures of Jyn Erso to create. First you need either the 3.75" Black Series version of her or the newer Vintage Jyn Erso #119 that is available on store pegs right now.  The second figure that you need is the 5poa Rogue One: A Star Wars Story Jyn Erso for her head, poncho and accessories. First boil and pop the arms off the 5poa version of her so you can slip the poncho off the figure. If you remove the vest from the super-articulated figure that you chose from, you can possibly slip the poncho onto the figure if you can do so before the rubber cools. We made a slice with an X-acto knife along the right edge of her poncho where it wouldn't show when we glued it back in place after we slipped and stretched it over the super-articulated frame. We maintained pressure as the glue dried until it held firm. After, the poncho was in place we sculpted the baggier 3/4 sleeves of the poncho onto the forearms of the figure with ProCreate. Elias then gave the head a new repaint to finish her off, after Darth Daddy finished painting the body.


3.75" SUPER-ARTICULATED
"JYN ERSO - EADU"
created by Darth Daddy

















SKILL LEVEL: ADVANCED







Saturday, July 8, 2017

ROGUE ONE "JYN ERSO - IMPERIAL FLIGHT CREW HELMET MODIFICATION" by Customs for the Kid

Not sure about all of you, but we had to grab a second Jyn Erso action figure from when she was disguised as an Imperial Flight crew member just so we could make this custom version of Jyn.  Only a slight helmet modification was needed to show Jyn's face through the helmet like she appeared in the film.  Grab your sharpest razor blade and with some parent supervision, slice away the thin bit of rubber to show Jyn's eyes when she wears the helmet.

We grabbed some "Death Star Walls" from a kit that Star Wars customizer, Thank The Maker, recently offered for sale on his eBay page. It's a cheap way to dress up your shelf displays.  They are perfect for photo shoots! I have a feeling we'll be using them in many photo shoots to come.  We were able to paint and assemble the kit in only a day. It can be a great craft project to entertain kids on a rainy day too!  We love these walls for their versatility. You can build them out however you like!



"JYN ERSO - IMPERIAL FLIGHT CREW 
HELMET MODIFICATION"
by Customs for the Kid


 Our custom pictured next to Hasbro's version of Jyn.







SKILL LEVEL: BEGINNER


Our glued panels held in place to dry. Just before paint was added.









Wednesday, February 1, 2017

CUSTOMIZER SPOTLIGHT #49: "Rogue One - The Death Star Plans" by Phill Scott

Recently, Star Wars customizer Phillip Scott created a 3.75" accessory for the Jyn Erso action figure that I wish we all got on store pegs...the Death Star Plans. After making the piece, he molded it and produced a limited run of casts.  When he asked if any fellow artists were interested in obtaining a cast, we jumped at the chance to add the small cartridge to the hand of our Black Series figure.  As soon as we received it in the mail, we took some pictures to show it off.



"Rogue One - The Death Star Plans"
by Phillip Scott











THE ORIGINAL POST ON REBELSCUM:

"Rogue One - The Death Star Plans" by Phillip Scott